Cloud native EDA tools & pre-optimized hardware platforms
BELMONT, Calif. and MOUNTAIN VIEW, Calif., Sept. 18 /PRNewswire-FirstCall/ -- Nikon Corporation, a leading supplier of lithography equipment for microelectronics manufacturing, and Synopsys, Inc. (NASDAQ: SNPS), a world leader in semiconductor design and manufacturing software, today announced that Nikon's proprietary optical lithography exposure tool data is available for the latest release of the Synopsys Proteus optical proximity correction (OPC) software. As part of an ongoing collaboration, the two companies developed an embedded scanner parameter module, which delivers the "manufacturing-aware" OPC and resolution enhancement technology (RET) lithography simulation models needed for advanced 45-nanometer (nm) and below IC (integrated circuit) manufacturing. Mutual customers can benefit from improved OPC model accuracy and reduced time to silicon.
At 45 nm and below, critical dimension (CD) control takes place at the single nanometer level, pushing current OPC/RET models and optical-lithography system performance to extreme limits. Current OPC design tools use idealized models of lithography tools to correct for optimal proximity effects of the mask pattern. Only by iteratively adjusting the mask pattern and comparing the simulated model to the calibrated exposure results can the mask pattern be optimized. This approach may not produce accurate, predictable models and therefore may not be suitable for OPC at advanced technology nodes.
To address this challenge, Nikon and Synopsys undertook a collaboration last year with the goal of delivering a "manufacturing-aware" OPC solution that provides improved modeling accuracy for their mutual customers, thereby reducing the cost of development at advanced nodes. The newly developed interface allows Proteus modeling customers to automatically access Nikon's proprietary scanner information, including such higher-order lithographic effects as polarization, flare, synchronization, and various aberration data for the following Nikon exposure systems: NSR-S610C, NSR-S609B, and NSR-S308F. Because models created with this methodology can accurately predict lithographic printing effects previously missed with traditional "idealized" OPC models, this new integration significantly increases OPC modeling accuracy and reduces OPC modeling time. This new functionality is available for the latest production release of Proteus.
"Together with Synopsys, we have shown the benefits of using an accurate scanner model for OPC development," stated Toshikazu Umatate, executive officer, Precision Equipment Company, Nikon Corporation. "By incorporating our proprietary scanner information into the Proteus software, Nikon customers can gain a competitive advantage with improved OPC accuracy and faster optimization time."
"Proteus OPC has demonstrated significant technology leadership. It's been in production for 10 years and seven consecutive technology nodes, delivering significant software performance improvement year over year. Combining proprietary lithography information from Nikon with Proteus mask-synthesis data moves OPC accuracy into a new domain leading to improved CD control at 45 nanometers and below," said Dr. Wolfgang Fichtner, senior VP and general manager, Silicon Engineering Group at Synopsys. "This collaboration will help our mutual customers achieve their model production and yield goals, thereby reducing their overall cost of ownership."
Since 1980, Nikon Corporation has been revolutionizing lithography with innovative products and technologies. The company is a worldwide leader in lithography equipment for the microelectronics manufacturing industry with more than 7,800 exposure systems installed worldwide. Nikon offers the most extensive selection of production-class steppers and scanners in the industry. These products serve the semiconductor, flat panel display (LCD) and thin-film magnetic head (TFH) industries. Nikon Precision Inc. provides service, training, applications and technical support, as well as sales and marketing for Nikon lithography equipment in North America. For more information about Nikon, access our web site at http://www.nikonprecision.com/
About Synopsys DFM
Synopsys, Inc. (NASDAQ: SNPS) is a world leader in electronic design automation (EDA) software for semiconductor design. With its design for manufacturing (DFM) tools, Synopsys is expanding on what is already a comprehensive DFM solution that spans from RTL to silicon. Synopsys' DFM product family addresses critical manufacturability and yield issues with the following products: IC Compiler physical design solution, PrimeYield LCC, PrimeYield CMP, Hercules™ PVS, Proteus OPC, CATS® mask data preparation product, SiVL® lithography verification tool, patented PSM technology and software, IC WorkBench Viewer and Editor tool, and physics-based TCAD suite of simulation products. Synopsys' Manufacturing Yield Management (MYM) solutions extend directly into the fab, providing customers real-time access to yield data and the analysis capability needed to reduce random, systematic and parametric defects. Visit Synopsys online at http://www.synopsys.com/.
Synopsys, Inc. (NASDAQ: SNPS) is a world leader in electronic design automation (EDA) software for semiconductor design. The company delivers technology-leading system and semiconductor design and verification platforms, IC manufacturing and yield optimization solutions, semiconductor intellectual property and design services to the global electronics market. These solutions enable the development and production of complex integrated circuits and electronic systems. Through its comprehensive solutions, Synopsys addresses the key challenges designers and manufacturers face today, including power management, accelerated time to yield and system-to-silicon verification. Synopsys is headquartered in Mountain View, California, and has more than 60 offices located throughout North America, Europe, Japan and Asia. Visit Synopsys online at http://www.synopsys.com/.
Synopsys, CATS and SiVL are registered trademarks of Synopsys, Inc. Hercules is a trademark of Synopsys, Inc. Any other trademarks or registered trademarks mentioned in this release are the intellectual property of their respective owners.
Editorial Contacts: Sheryl Gulizia Synopsys, Inc. 650-584-8635 email@example.com Lisa Gillette-Martin MCA, Inc. 650-968-8900 x115 firstname.lastname@example.org Bernie Wood Nikon Corporation 650-413-8533 email@example.com
SOURCE: Synopsys, Inc.
CONTACT: Sheryl Gulizia of Synopsys, Inc., +1-650-584-8635,
firstname.lastname@example.org; or Lisa Gillette-Martin of MCA, Inc., +1-650-968-8900,
ext. 115, email@example.com, for Synopsys, Inc.; or Bernie Wood of Nikon
Corporation, +1-650-413-8533, firstname.lastname@example.org
Web site: http://www.synopsys.com/